Program Update; Troubleshooting - Megasat Countryman-GPS Benutzerhandbuch

3. Program update

Connection Diagram
Controller cable
color black
"USB port is used for firmware upgrade only"
Simply connect the Controller to PC using USB cable. USB cable is not included in the package.
Note:
For firmware and satellite updates please visit our Homepage: www.megasat.tv
ENGLISH
10
Fernseher
Receiver cable
color grey
Receiver
Adaptor or Cigarette light adaptor
USB cable (A Type)
Notebook / PC

4. Troubleshooting

There are a number of common issues that can affect the signal reception quality or the
operation of the Countryman GPS. The following sections address these issues and potential
solutions.
A. No function when you power on the Controller
1. Check again all the cable connections have been made correctly.
• Connection between the power and controller
• Connection between the controller and the antenna. Make sure that the left
port of the antenna should be connected to the controller.
2. Check if the cigarette lighter adaptor or adaptor has been damaged.
B. Fail to search the selected satellite
1. Satellite signals can be blocked or degraded by buildings, trees.
Make sure there are no obstructions in a southward direction.
2. Check your program of Controller often, and get the latest up-
dates for your Countryman GPS.
C. Mechanical problems
1. If the antenna does not move into desired position.
• Try to power OFF/ON again.
2. If the antenna makes a noise whilst remaining static.
• Try to power OFF/ON again. If problem persists, please contact your local distri-
butor for assistance.
D. Other issues
1. If the system has been improperly wired, it will not operate properly. Contact your
local distributor for assistance of cable damage.
ENGLISH
11