Kenwood A993A Bedienungsanleitung Seite 6

G
Smoothie recipes - never blend
frozen ingredients that have formed
a solid mass during freezing, break it
up before adding to the liquidiser.
to use your liquidiser
1 Ensure the sealing ring
in the blade unit
2 Place the jug in the fixed blade unit
and turn firmly to lock. To assist with
fitting, align the
on the fixed blade unit, then
turn to lock until the symbols align
as shown .
G
When fitting or removing the jug, the
fixed blade unit must not be resting
on a flat surface, as the safety
interlock tabs must be free to drop
down when
assembling/disassembling.
3 Put your ingredients into the jug.
4 Fit the lid seal inside the lid. Fit the
filler cap.
5 A993A/A994A - screw the lid onto
the jug.
A996A - push the lid down.
6 Remove the high speed outlet
cover .
7 Lock the liquidiser onto the outlet by
grasping the fixed blade unit
turning clockwise.
8 Switch to 'max'.
hints
G
To prevent leaks:
wet the sealing ring before fitting
G G
it; and
Make sure the jug is locked firmly
G G
into the fixed blade unit.
G
When making mayonnaise, put all
the ingredients, except the oil, into
the liquidiser. Then, with the machine
running, remove the filler cap and
add the oil slowly and evenly.
G
Thick mixtures, eg pâté, dips: use
low to medium speed, scraping
down when necessary. If it's difficult
to process, add more liquid.
is in place
.
on the jug with the
and
cleaning
G
Always dismantle before cleaning.
G
Empty the jug before unscrewing the
fixed blade unit.
fixed blade unit
1 Remove and wash the sealing ring.
2 Brush the blades clean under the
tap. Keep the underneath of the unit
dry.
3 Leave to dry.
other parts
Wash by hand in hot, soapy water.
3