Using The Brakes - TOPRO TROJA NEURO Bedienungsanleitung

EN EN
TROJA NEURO

Using the brakes

2
Make sure the brakes work before each use and that the rollator moves when the brake handles are pushed in A.
Each brake handle B works on each of the rear wheels.
The rollator wheels are made of a special soft rubber, which gives an optimal braking capacity on slippery floor.
Wrong use can cause unsafe situations and damage to the rollator: The rollator must not be driven or pushed with
force when the brake handles are not pushed in. This indicates incorrect use and can cause wear and tear, which makes
the tires, and brake quality weaker. Parking brakes: Release the brake handles B. Both rear wheels are now locked.
Squeeze both brake handles upwards to release the parking brakes A. To brake during walking, release the brake
handles. Tip: If the handles are pushed all the way down to lock position, the rollator can move freely.
Maintaining the brakes
6
Clean the brake block A and the brake spring B frequently. The wheels and brakes can be changed if they are worn
out or damaged.
Seat
7
The brake handles B must be released before using the seat A. Both rear wheels are now locked. Sit with your back
towards the basket C.
Basket
8
The basket is enclosed. It holds up to 10 kilos and is easily attached or removed.
To mount the basket, stand between the handles of your rollator and make sure that the brakes are on. Then lift
the basket forwards in order to slide it underneath the seat and onto the front and the carrying handles A.
When it is placed correctly, you will hear a click. Make sure that the brake wire still runs unrestrained along the frame
B. To remove the basket, stand between the handlebars and place your hands towards the front of the basket, one
either side. Lift the basket up while pressing it slightly together. This will release it C. Always use both hands when
performing this operation. The bag can be washed gently at 40 °C.
Edge guard // Tilt function
9
Edge guard: The edge guards A, which are in front of the rear wheels prevent the rear wheels from catching
on corners, door frames etc.
Tilt function: To use the tilt function use the front of the foot and press down on the tilt pedal B, which is beside
the rear wheel. This helps to tilt the rollator over thresholds, edges etc. Please note: Take care when descending
kerbs. Do not use the rollator in stairs.
Laser light (applies to the models 814743 and 814744)
10
The TOPRO TROJA NEURO can be delivered with a laser light that can be of help for users with neurological disease
that suffer from "freezing" episodes. The laser light can easily be operated from the handle and the transfer is wireless
to the laser light box.
Batteries must be inserted before the laser light can be used: Unscrew the lid A located by the left-hand handle.
Insert the flat battery (Lithium CR 2032) and screw the lid back on. Thereafter, insert two AA batteries (LR6) in the laser
light box located on the left frame bar B. The lid, located on the inside, must be pushed down. Make sure to follow the
"+/−" signs when inserting the batteries. The batteries cannot be recharged and will normally last for approximately
1 year with normal usage (approximately 15 minutes per day). Beware that the battery lifetime will decrease as the
frequency and length of usage increase.
Use of laser light: Push the button by the left-hand handle A. The laser light unit B, which is located on the left frame
tube, will then generate a green line in front of the feet of the user C. The laser light unit is designed to withstand
humid weather but is not 100 % waterproof. Caution! Both boxes A and B must be removed during hosing or
disinfection of the rollator.
NB! This Class 3R-laser is considered safe for normal operation. However, we advise you not to look directly towards
the laser beam from the laser light unit B, to protect your eyes from injuries. Laser light settings: Moving the laser
light unit up or down the frame tube can move the location of the laser beam forward or backward. The amount of
seconds/minutes the laser beam is activated as a result of pushing the laser light button A can be regulated by adjust-
ing the switch D located inside the laser light unit B. Push down the lid and adjust the switch with a screwdriver in the
positions 1–4, corresponding to the following durations for the laser beam:
1 = 15 seconds 2 = 30 seconds 3 = 120 seconds 4 = flashes for 15 seconds
www.topro.no 9