Replacing The Batteries; Changing The Batteries; Switching The Light On And Off - Crivit IAN 311397 Gebrauchsanleitung

Danger!
• Handle a damaged or leaking battery with extreme
care and dispose of it properly and immediately.
Wear gloves to handle the battery.
• If you come into contact with battery acid then wash
the affected area with soap and water. If battery
acid gets in your eye rinse it out with water and seek
medical help immediately!
• Do not short-circuit the terminals.
Replacing the batteries (figure A)
CAUTION! Please follow these instructions
in order to avoid mechanical and electrical
damage.
1. Hold the article firmly in one hand with the lamp
pointing downwards.
2. Use the other hand to twist off the cover (1a) on the
battery compartment in an anti-clockwise direction.
3. Insert the batteries into the article as shown in
figure A.
Note: Pay attention to the plus and minus poles on
the batteries and that they are inserted correctly. The
batteries must be located entirely inside the battery
compartment.
4. Place the battery cover back on the article and
tighten it in a clockwise direction.

Changing the batteries

Should the batteries no longer work then you can chan-
ge them. Proceed as described in the section 'Repla-
cing the batteries (figure A)'.

Switching the light on and off

(figure B)
There are various light settings selected by pressing the
on and off button (1b):
Press once: light on.
Press twice: light dimmed.
Press 3 times: light flashes.
Press 4 times: light off.
10 GB