Motor Overriding System; Installation Layout - V2 GOLD400D Bedienungsanleitung

MOTOR OVERRIDING SYSTEM

WARNING: In case the leaf overruns its final position
and impacts against the safety stroke end (i.e. wrong
regulation of the limit switches),and a manual unclamp
would be necessary, before using the above procedure,
you have to replace the leaf setting away from the safety
stroke end using the flat screw on the main motor shaft 2
with a screwdriver.

INSTALLATION LAYOUT

WARNING: ALL THE CABLES USED FOR THE INSTALLATION MUST BE MARKED WITH T100°C.
30