Brink E-module Bedienungsanleitung Seite 7

For WLAN (wireless) operation of the E-module / I-module:
user name „admin" and enter newly assigned password.
24. Now enter the SSID (WLAN name) and the password (WLAN key) of the WLAN (wireless) router (If the data have not been
changed, these can usually be found on the rear of the router).
module. If the router must be set at "
26. Switch off the ventilation appliance and take the power from the E-Module.
Module.
28. Restore the original network settings of the PC / laptop (repeat items 4-7).
29. The E-module / I-module is now ready for WLAN (wireless) service, within 3 to 5 minutes the yellow and red link lights are on and,
if internet access is authorised, the green LED is on continuously.
The button of the E-module/ I-module has the following functions:
LED
button
green
red
yellow
For WLAN (wireless) operation of the E-module / I-module:
Only meaningful if the internet link to the Brink Portal Server (see Item 20), has been released!
If you do not yet have an account at the portal server, you can register through the internet at www.brink-home.com. When the green
LED on the E-module / I-module is on, the installation can be added to your portal by entering the serial number of the E-module/ I-
module and the newly assigned password.
Art.-nr.: 614382-A
" or "
Holding time
Function
button
Start eBus registration
< 1 S
(All LEDs off)
Setting the static
IP address 192.168.1.67 of the
1 S and 5 S
E-module / I-module
(green LED)
Soft reset of E-module /
5 S and 10 S I-module
(green and red LED are on)
Resetting the factory settings
of the E-module / I-module (all
LEDs are on).
< 10 S
Restarting the E-module /
I-module required (searching
ventilation appliance off/on)
I-module/ E-module
Meaning LEDs
No connection with Brink
Off:
portal
green
Blinking: Connecting to Brink portal
LED:
On: Connection with Brink portal
Off: WLAN not active
Blinking: Connecting to the WLAN.
red LED:
On: Connection with WLAN.
eBus communication not
Off:
active.
yellow
Connected components are
Blinking:
LED:
being identified
On: eBus communication active
UK
Enter
7