Drip-Stop Function; Control Panel; Audio Signals; Setting The Clock, Timer And Auto-Brewing - CASO DESIGN NOVEA C4 Originalbetriebsanleitung

14.2.2 Drip-stop function

The drip-stop function enables you to remove the carafe from the coffee maker
and pour a cup of coffee before brewing is finished. When the carafe is removed,
a special valve stops the flow of coffee from the brew basket to the carafe. Brewing,
however, does not stop.
Please note
► If the carafe is not replaced under the brew basket after 20 seconds, water
and coffee will overflow from the brew basket.

14.3 Control panel

14.3.1 Audio signals

1. When the coffee maker is first plugged in, one beep will sound.
2. When the coffee maker has finished brewing, three beeps will sound.
3. When the 40 minutes warming plate period has ended, five beeps will sound.

14.3.2 Setting the clock, timer and auto-brewing

Use the buttons
1. When the coffee maker is first plugged in, the clock will flash the default time
of 12:00 AM.
2. Press the button
12:00 AM to 11:00 PM.
3. Press the button
4. You can make the hours and minutes move more quickly in the clock display by
holding the buttons down.
5. The clock will begin keeping time at the moment the buttons
Use the buttons
1. First set the clock. See directions above.
Caso Kaffeemaschine NOVEA C4
and to set the clock.
to change the setting to any hour number between
to change the setting to any minute number between 0 and 59
and to program an automatic brew time.
and are released.
32