PeakTech 5615 Bedienungsanleitung Seite 21

4.1. General measurement settings
The thermometry parameters influence the accuracy of the
temperature measurement.
1. In live view, briefly press the
2. Press the
menu item
3. Select the measurement option with the
•
Emissivity: Setting the emission factor (see table). The
emission factor strongly influences the measurement
accuracy of the temperature displays and should
therefore be selected correctly.
•
Temperature: Set the ambient temperature at your work
location for a more accurate measurement result.
•
Distance (m / feet): Set the distance to the measured
object.
Note: Recommended measurement distance is 0.2m to
2m with a target size of 80x80mm
•
Rule: Turn on or off the Hot Spot, Cold Spot, MIN MAX
displays in live view.
4. Press the
be changed and
5. Press the
keep the buttons pressed to make rapid changes
6. Save and finish the process with the
/
buttons to navigate to the desired
/
buttons to select the parameter to
to confirm
/
buttons to change the value or
-21-
button to enter the menu
button:
button