Carrying Out The Descaling Programme - AVOURY ONE Bedienungsanleitung

CLEANING AND MAINTENANCE
PAG E 16
Carrying out the
descaling programme
When the "Descaling necessary"
LED is illuminated, this means
13
that the descaling programme must be
carried out. The programme lasts for
approximately 20 minutes.
1. Switch on the tea maker.
2. Open the pod compartment
remove the sealing lm and insert a
cleaning pod.
The LED "Descaling necessary"
begins to ash and the
On/O button illuminates.
9
3. Press the On/O button to start the
descaling programme.
The LED "Descaling necessary" will
ash throughout the entire cleaning
programme.
The LED "Water tank empty"
will go out.
4. Empty the water tank
remove the water lter, if necessary.
5. Pour 250 ml of Avoury liquid desca-
ling agent and an additional 250 ml
of tap water into the water tank.
6. Replace the water tank again.
The LED "Empty pod basket"
illuminates.
7. Empty the drip tray and the pod
basket .
7
8. Replace both parts again.
9. Place a container that holds at least
300 ml volume under the outlet
Descaling takes place in 250 ml
cycles. Once the descaling liquid
has passed through the system, it is
released into the container. Once a
cycle has been completed, the con-
tainer must be emptied and placed
under the outlet again. At this point,
press the On/O button to con rm
,
2
that the next cycle can begin. This
process should be repeated until
the water tank has been emptied
entirely.
After the rst part of the descaling
programme has been completed,
the "Water tank empty"
lights up.
10. Remove the water tank and tip away
the remaining liquid.
11. Rinse out the water tank with fresh
10
tap water.
12. Empty the container and place it
and
4
back under the outlet.
13. Fill the water tank with 500 ml tap
water and put it back in again.
The tea maker rinses the brewing
unit in 250 ml cycles with clear tap
water. The tap water that passes
10
through runs into the container.
Once a cycle has been completed,
the container must be emptied and
placed under the outlet again. At
this point, press the On/O but-
ton to con rm that the next cycle
.
8
EN
LED
10
PAGE 35