Rinsing The Brewing Container; Making Tea - AVOURY ONE Bedienungsanleitung

USE
EN
PAGE 30
Rinsing the brewing
container
The tea maker must be cleaned out
before the rst use and after longer
periods of non-use to remove any
manufacturing residues and contamina-
tion. To do this, the tea maker must be
switched on.
1. Remove the packaging material and
the adhesive strips.
2. Remove the water tank
rinse it out with clear tap water.
3. Replace the water tank again.
4. Fill the water tank with water up to a
maximum level of two nger widths
below the upper edge.
5. Place a container that holds at least
300 ml volume under the outlet
6. Push the On/O button
7. Press the –/+ lling capacity
buttons at the same time
The tea maker rinses the brewing
container and dispenses water into
the container.
8. Empty the contents of the tray of
the pod catching drawer
the container into the sink.

Making tea

1. Remove the water tank
with water up to a maximum level of
two nger widths under the upper
edge of the water tank.
2. Switch on the tea maker.
3. Wait until the On/O button
illuminated constantly.
4. Place a cup under the outlet
The cup must be able to hold at
least 250 ml.
and
4
5. Remove the sealing lm from the
pod.
6. Open the pod compartment
insert the pod the right way up. The
ap on the pod must be pointing
upwards.
.
8
.
9
/ .
18 19
and
7
and ll
4
is
9
.
8
and
2
PAG E 11