Using A Water Filter; Cleaning And Maintenance; Carrying Out The Cleaning Programme - AVOURY ONE Bedienungsanleitung

CLEANING AND MAINTENANCE

PAG E 14
3. To set the water hardness level,
press the +/– buttons for the brew-
ing time.
If the LEDs on the left of the display
are illuminated, it is set for hard
water. If the LEDs on the right of the
display are illuminated, it is set for
soft water.
4. Con rm the settings by pressing the
On/O button .
9
Using a water lter
You can insert a water lter into the wa-
ter tank . This lters limescale and
4
particles out of the water. This improves
the enjoyment of the tea and extends
the service life of the tea maker.
1. Place the water lter with one of
the two at sides into the tea maker
pointing towards the valve in the
water tank.
2. Fill the water tank with tap water as
usual.
3. The water lter must be changed
every two months to prevent exces-
sive contamination from microor-
ganisms.
The water lter must be re-
moved before carrying out the
descaling programme.
Cleaning and
maintenance
The cleaning and descaling
programme must be complet-
ed once started. Stopping this
process prior to completion,
e.g. as a result of an interrup-
tion in the power supply, causes
the programme to restart or
may lead to error noti cations
in exceptional cases (all four
info LEDs are ashing).
Carrying out the clean-
ing programme
If the "Clean machine" LED
illuminated, you need to clean the
machine using a cleaning pod. The
programme lasts for approximately 15
minutes.
1. Switch on the tea maker.
2. Fill the water tank
water.
3. Open the pod compartment
remove the sealing lm and insert a
cleaning pod.
The "Clean machine" LED begins
to ash and the On/O button
illuminates.
4. Press the On/O button to start the
cleaning programme.
EN
is
12
with tap
4
,
2
9
PAGE 33