Lincar Ilaria Bedienungs- Und Wartungsanleitung Seite 48

INTERNAL EXHAUST GAS FUMES CLEANING :
•
At least one per year or every time it's necessary
•
The inside cleaning must be done always when the appliance is cold
All the necessary cleaning equipments should be prepared before starting this operations
Fig. 8
UPPER FUME CONVEYER CLEANING
•
Take away the upper plate by lifting it upwards (Fig. 8) in this way you access tot o all
parts of the fume conveyer which must be cleaned from the residual of the combustion,
using the proper tools, (hook poker, brush, shovel, ...)
•
Once the cleaning operations have been terminated re assemble the top plate having care
to effect a correct assembly of the different parts.
UNDER OVEN FUME CONVEYER CLEANING
•
Open the accessory compartment door; unscrew the cleaning cover wh9ich is fixed to the
front part and remove it, in this way you access tot o all parts of the fume conveyer
which must be cleaned from the residual of the combustion, using the proper tools, (hook
poker, brush, shovel, ...)
•
Once the cleaning operations have been terminated re assemble the top plate having care
to effect a correct assembly of the different parts. The reinforcement on the cleaning
cover must be turned to the internal part.
•
N.B. In order to grant a perfect seal assure yourself that the gasket which is placet among
the cleaning cover and the front part is in good order, otherwise replace it with a new
fibre ceramic gasket. Put it at place "K".
Clean Gasket K
(Fig.8)
48/124
IT-GB-FR-ES-DE mod. 703T
Cleaning cover
(Fig.9)
Fig. 9