Lincar Ilaria Bedienungs- Und Wartungsanleitung Seite 41

IGNITION
•
Put on the brazier a lighting-cube or a small quantity of paper, around 0,5 kg of wood in
small pieces. By means of the tools, which are furnished with the appliance, completely
open the primary air (thermo regulator), open the fume valve and close the oven cooking
valve. Light the paper and close the door.
•
When the appliance is completely lighted, add some larger wood pieces. Repeat this
operation till when the appliance has reached the " Hourly Charge " as indicated in the
technical details, than regulate the primary and secondary air as indicated in the chapter
Regulations
•
The equipment should be loaded when the flame is low to avoid fumes or combustion
products escape.
Note only for mod. : 703T-G / 703T-GL
The proper functioning of the appliance is ONLY WITH OPEN COVER.
Close the cover when the machine is cold.
LOADING - TO RESTART WITH EMBERS ( Moderates flames )
In case of starting with embers, go on as follows :
•
Thicken the embers on centre foyer .
•
Open totally the prime air and the fumes valve
•
Wait few minutes till in the brazier appears a flame sufficient for a new starting.
•
Load some wood pieces of small dimensions and wait for the complete starting.
•
Replace the primary air and fumes valve in the normal position as indicated in the
chapter "Regulations".
Radiant plate
Plate
frame
Fire Door
Ash Door
IT-GB-FR-ES-DE mod. 703T
41/124
Cats iron rings
Oven Door
Accessories Door
Fig.1