ASROCK ALiveSATA2-GLAN Handbuch Seite 23

2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows
2.11.2 Installing Windows 2.11.2 Installing Windows
Functions Functions Functions Functions Functions
If you want to install Windows
with RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. If you plan to install Windows
RAID functions, please set the "SATA Operation Mode" option to [RAID]. If you
®
plan to install Windows
RAID functions, please set the "PCIE-SATAII Operation Mode" option to [RAID].
STEP 2: Make a SATAII driver diskette. (For JMicron
mode only.)
If you set "PCIE-SATAII Operation Mode" to [RAID] mode, and plan to install
® TM TM
Windows Vista / Vista
on page 21 for detailed procedures of making a SATAII driver diskette. Otherwise,
please skip this step.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
® TM
Insert the Windows Vista
your system, and follow the instruction to install Windows
OS on your system.
If you plan to install Windows
see "Where do you want to install Windows?" page, please insert the ASRock
Support CD into your optical drive, and click the "Load Driver" button on the left on the
®
bottom to load the VIA RAID drivers. VIA
our Support CD:
.. \ I386 \ NT5 (For Windows
.. \ AMD64 \ 2003x64 (For Windows
If you plan to install Windows
when you see "Where do you want to install Windows?" page, please click the
"Load Driver" button on the left on the bottom to load the JMicron
the SATAII driver diskette you just made.
After that, please insert Windows
drive again to continue the installation.
ASRock ALiveSATA2-GLAN Motherboard
Vista Vista Vista / Vista / Vista / Vista
Vista Vista / Vista / Vista
® ® ® ® ® TM TM TM TM TM
® TM TM
Vista or Vista 64-bit on your SATA / SATAII HDDs
Advanced screen
® Vista TM / Vista TM 64-bit on VIA
TM TM
Vista / Vista 64-bit on JMicron
®
64-bit on JMicron SATAII HDDs, please refer to step 2
® Vista TM / Vista TM 64-bit OS on your system.
TM
/ Vista 64-bit optical disk into the optical drive to boot
® Vista TM / Vista TM 64-bit on VIA
®
RAID drivers are in the following path in
® Vista TM OS)
® Vista TM 64-bit OS)
® Vista TM / Vista TM 64-bit on JMicron
® Vista TM / Vista TM 64-bit optical disk into the optical
64-bit With RAID 64-bit With RAID 64-bit With RAID
64-bit With RAID 64-bit With RAID
TM TM TM TM TM
IDE Configuration.
® SATA ports with
®
SATAII ports with
® SATAII ports in RAID
® TM TM
Vista / Vista 64-bit
® SATA HDDs, when you
® SATAII HDDs,
®
RAID drivers from
2 3 2 3 2 3
2 3 2 3