ASROCK ALiveSATA2-GLAN Handbuch Seite 15

It is recommended to plug SATAII HDD to SATAII connector (SATAII_1 or
SATAII_2) and connect SATA HDD to SATA connector (SATA1 or SATA2).
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB6_7)
(see p.2, No. 10)
(9-pin USB4_5)
(see p.2, No. 11)
Infrared Module Header
(5-pin IR1)
(see p.2, No. 30)
Internal Audio Connector
(4-pin CD1)
(CD1: see p.2, No. 33)
ASRock ALiveSATA2-GLAN Motherboard
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATA /
SATAII connector on the
motherboard.
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
Besides four default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports an optional
wireless transmitting and
receiving infrared module.
This connector allows you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
CD1
tuner card, or MPEG card.
1 5 1 5 1 5
1 5 1 5