Yamaha ProR3 Bedienungsanleitung Seite 8

4
Front panel
7 Numeric keys
These keys are used to directly input the number of a program that you wish to recall, or to input
parameter values.
When you use the numeric keys to input a parameter value, the value will blink until it is final-
ized. Press the RECALL/ENTER key to finalize the value. To return to the original value, press
the CANCEL key. Some parameters cannot be entered using the numeric keys.
To specify a negative value (for example an equalizer gain of –9 dB), use the "–" key. To specify a
value with a decimal point (for example an equalizer Q of 2.5), use the "." key.
7 8 9
4 5 6
2
1 3
–
0 •
7-A PROGRAM key
This key is used when selecting programs. Each time you press the key, the program status
will alternate between PRESET and USER.
7-B STORE key
This key is used to store the settings of a program that you created.
7-C CANCEL key
This key is used to cancel a value that was entered by the numeric keys.
7-D RECALL/ENTER key
This key is used to recall a program whose number was entered by the numeric keys, or to
finalize a parameter value.
8 INFINITE key
When this key is pressed, the indicator will light, and the RevTime parameter will be dramati-
cally lengthened. This produces the effect of a "freeze-frame" or "stop-motion" sound.
9 POWER switch
This switch turns the power on/off.
When the power is turned on, the program that was last being used when the power was turned
off will be selected.
10 INPUT level control (L, R)
The inner knob is the input level for the left channel, and the outer knob is the input level for the
right channel. The knobs are coaxial for convenience when you are adjusting the level of a stereo
source.
ProR3 Digital Reverberator
PROGRAM
A
STORE
B
CANCEL
C
RECALL/
ENTER
D