Reverb + Auto Pan (Rev + Pan); Common Parameters - Yamaha ProR3 Bedienungsanleitung

Reverb + Auto Pan (Rev + PAN)

Key Parameter
MAIN
REV RevTime
REV IniDelay
REV HighRatio
REV LowRatio
REV Diffusion
PAN Speed
PAN Depth
PAN Direction
FINE
PAN/REV Balance *1
REV Rev Mix *2
REV Reverb Type
REV Density
REV HPF
REV LPF
REV Space Mod
REV Patch

Common parameters

*1 Only when REV Patch is parallel (Reverb + PAN)
*2 Only when REV Patch is serial (Reverb → PAN, PAN → Reverb)
*3 Hall, Room, Vocal, Plate
*4 Reverb + PAN, PAN → Reverb, Reverb → PAN
Common parameters
Key Parameter
FINE
1stRef-1 Delay
1stRef-1 Lvl
1stRef-1 Pan
1stRef-2 Delay
1stRef-2 Lvl
1stRef-2 Pan
Input Mix *1
continues to DFL
*1 Only for stereo mode
Value
0.3 ~ 99.0 s
0.1 ~ 200.0 ms
X0.1 ~ X1.0 Refer to "Reverberation" items on page 18
X0.1 ~ X2.4
0 ~ 10
0.05 ~ 40.00 Hz Modulation frequency of auto-pan
0 ~ 100% Modulation depth of auto-pan
L→R, L←R, L ↔R
Direction of panning movement
0/100 ~ 100/0 Level balance of reverb and auto-pan
0 ~ 100% Reverb amount
*3 Type of reverb tone
0 ~ 100 Density of reverb
Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of reverb high pass filter
400 Hz ~ 20 kHz, Thru Cutoff frequency of reverb low pass filter
0 ~ 10 Modulation level of reverb
*4 Connection of auto-pan and reverb
Refer to "Common parameters" on page 27
Value
0.1 ~ 200.0 ms Delay time of reflection 1
0 ~ 100% Level of reflection 1
L16 ~ R16 Pan position of reflection 1
0.1 ~ 200.0 ms Delay time of reflection 2
0 ~ 100% Level of reflection 2
L16 ~ R16 Pan position of reflection 2
0 ~ 100% Stereo-mix adjustment
Advanced uses (2) – Editing functions –
Description
Description
ProR3 Digital Reverberator
27