Reverb + Chorus (Rev + Cho) - Yamaha ProR3 Bedienungsanleitung

Reverb + Chorus (Rev + Cho)

Key Parameter
MAIN
REV RevTime
REV IniDelay
REV HighRatio
REV LowRatio
REV Diffusion
CHO Mod Freq
CHO DM Depth
CHO AM Depth
FINE
CHO/REV Balance *1
REV Rev Mix *2
REV Reverb Type
REV Density
REV HPF
REV LPF
REV Space Mod
REV Patch
Common parameters
*1 Only when REV Patch is parallel (Reverb + Chorus)
*2 Only when REV Patch is serial (Reverb → Chorus, Chorus → Reverb)
*3 Hall, Room, Vocal, Plate
*4 Reverb + Chorus, Chorus → Reverb, Reverb → Chorus
Value
0.3 ~ 99.0 s
0.1 ~ 200.0 ms
X0.1 ~ X1.0 Refer to "Reverberation" items on page 18
X0.1 ~ X2.4
0 ~ 10
0.05 ~ 40.00 Hz Chorus modulation frequency
0 ~ 100% Chorus delay time modulation depth
0 ~ 100% Chorus amplitude modulation depth
0/100 ~ 100/0 Level balance of chorus and reverb
0 ~ 100% Reverb amount
*3 Type of reverb tone
0 ~ 100 Density of reverb
Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of reverb high pass filter
400 Hz ~ 20 kHz, Thru Cutoff frequency of reverb low pass filter
0 ~ 10 Modulation level of reverb
*4 Connection of reverb and ER
Refer to "Common parameters" on page 27
Advanced uses (2) – Editing functions –
Description
ProR3 Digital Reverberator
23