Control Board - EuroLine AKKU UP-4 HCL Spot WDMX Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
MODE UP DOWN ENTER
No. Menu level 1
1 6 - C H
2 8 - C H
3 1 2 C H
4 C - -
5 P - -
S - -
6
S n d
7
S e n S
8
9 U - -
d I M
10
S E T
11
12 W i r e
Wireless Setting
From factory, this projector is prepared for wireless data transmission (WDMX). If you wish to de-activate
WDMX control, you can select the function "Wire" – "Off". With the function "Wire" – "On" you can log in
the wireless receiver in to a wireless transmitter, the fixture could now receive the wireless DMX signal.
Browse through the menu by pressing Mode. You can change the selection by
pressing Up or Down. Press Enter in order to confirm. You can leave every mode by
pressing Mode. The functions provided are listed in the following sections.
Menu level 2 Menu level 3
d 1
d 5 1 2
d 1
d 5 1 2
d 1
d 5 1 2
C 1
C 2
C 3
C ...
C 6 1
C 6 2
C 6 3
P 1
P 2
P 3
P 4
S - - 1
S 1 0 0
u 0
u 1 0 0
r 0
2 5 5
g 0
2 5 5
b 0
2 5 5
A 0
2 5 5
W 0
2 5 5
P 0
2 5 5
O F F
d I M 1
d I M 2
d I M 3
O n
O F F
O n
O F F
Description
Setting
DMX channel mode (Slave mode)
DMX address setting
Default setting: 12 CH. d 1
Static colors
Default setting: RGBAWU
Internal programs (Master mode)
P 1：6 colors switching
P 2：6 colors fading
P 3：63 colors switching
P 4：63 colors fading
Default setting: P 1
Select the desired speed
S001 – S100 (increasing)
Default setting: 100
Sound controlled mode (Master mode)
Microphone sensitivity
u000 – u100 (increasing)
Default setting：80
Dimmer intensity of LED colors
000 – 255 (increasing)
Default setting：255
Dimmer speed (step response)
Off : Response characteristics of LEDs
DIM 1: Response characteristics of halogen lamps, fast
DIM 2: Response characteristics of halogen lamps, middle
DIM 3: Response characteristics of halogen lamps, slow
Default setting: Off
Control via IR remote
Default setting: On
Activate W-DMX
De-activate W-DMX
Default setting: On
32/40 00088947.DOC, Version 1.1