Installing; Connecting The Coaxial Cable; Figure 3-1 Slotting The Inforanger Into The Stand Holder; Figure 3-2 Connecting The Coaxial Cable To The Cable Connector - Samsung InfoRanger SCM-110R Benutzerhandbuch

Chapter 3
3-2
Installing the InfoRanger

Installing

The InfoRanger should be installed on a flat surface away from direct rays of
light. It should also be close to the cable outlet or cable
splitter for easier connection of cables. Then slot
the InfoRanger into the provided stand holder.

Connecting the Coaxial Cable

Connect the coaxial cable from the InfoRanger CABLE connector to the cable
outlet or cable splitter. Slide pin in the center of the coaxial cable into the hole in
the CABLE connector carefully without bending, and turn the connector
clockwise until the cable is firmly attached.

Figure 3-2 Connecting the coaxial cable to the CABLE connector

Figure 3-1 Slotting the InfoRanger into the stand holder