Configuring Tcp/Ip Protocol; Installing Tcp/Ip Protocol On Ibm Compatible Pc - Samsung InfoRanger SCM-110R Benutzerhandbuch

Configuring TCP/IP Protocol

nce you have set-up the IBM compatible PC running on Windows 95 (or later
O
version) or the Macintosh running on System 7.5(or later), you need to install a
network interface card and TCP/IP protocol.
Referring to the manual that provided with your network interface card, please
install the network interface card on your computer and install the network
interface card driver. Then, install TCP/IP protocol as follows. If you already
installed TCP/IP protocol, skip this chapter and go to the next chapter.

Installing TCP/IP Protocol on IBM Compatible PC

1. Click the [Start] button on the Windows 95 desktop, and click Settings
Control Panel.
2. In <Control Panel> window, double click Network icon.
3. When <Network> window appears, click [Add...] button.
4. When <Select Network Component> window appears, click Protocol
and then click [Add...] button.
5. When <Select Network Protocol> window appears, click Microsoft
from the 'Manufacture' list and then click TCP/IP from the 'Network
Protocols' list. Click [OK] button.
6. In <Network> Window, click TCP/IP from 'The following network
components are installed' list and click [Properties] button.
This installation is an example of an IBM compatible PC
running on Windows 95. Installation of TCP/IP protocol may
vary depending on the different operating system and/or a
network interface card used, but the overall process is
generally similar.
2-5