Environment Preparation For Installation - Samsung InfoRanger SCM-110R Benutzerhandbuch

Chapter 2
2-2
Prior to Installing

Environment Preparation for Installation

You should install the InfoRanger in a place with the following temperature,
humidity and stable electric power.
Operation temperature
Storage temperature
Operation humidity
Preservation humidity
Power Consumption
Input voltage
Rated frequency
Avoid static electricity and electric noise....
It may be necessary to use preventive equipment
if the InfoRanger is installed in a place where high
static electricity or electric noise is present.
Clean and well ventilated place....
Install the InfoRanger in a ventilated place where
the appropriate temperature and airflow is present.
As dust can cause a serious failure of operation,
please install the InfoRanger at a clean place.
Avoid the direct rays of light
Direct rays of light can increase temperature of the
InfoRanger and this can cause damage to operational
parts and lead to operation failure. Therefore, it is
recommended to keep the InfoRanger away from direct rays of light.
: 0 ~ 40
,
: - 30 ~ 70

: below 90% (40
, non-condensing),
: below 90% (60
, non-condensing)
: 10 Watt
: 100 ~ 240VAC
: 50 / 60Hz
While the InfoRanger is operating, the fluctuation range of
input voltage should be whithin 5% of regulated voltage.
Also, the electric outlet which is connected to input terminal
should be grounded.