Maintenance, Cleaning And Storage; After-Sales Service And Application Service - Bosch ART 24 Originalbetriebsanleitung

22 | English
The trimmer is equipped with a semi-automatic feeding sys-
tem. The spool feeds line each time the machine comes to a
stop (On/Off switch is released); too long line is cut off when
the machine is started again.
Troubleshooting
Problem Possible Cause
Trimmer fails to oper- Power turned off
ate
Mains socket faulty
Extension cable damaged
Fuse faulty / blown
Trimmer runs intermit- Extension cable damaged
tently
Internal wiring of garden tool defective
Trimmer motor is Grass too high
stalling
Trimmer does not cut Cutting line too short/broken off
Spool empty
Cutting line can no Line inside the spool entangled
longer be fed
Spool empty
Line retracts into spool Cutting line too short/broken off
Line breaks frequently Line inside the spool entangled
Trimmer used incorrectly

Maintenance, Cleaning and Storage

Before any work on the product, disconnect supply
u
cord from the mains.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
For safe and proper working, always keep the product
u
clean.
Do not place other objects on the garden product.
To ensure safe and efficient operation, always keep the
product and the ventilation slots clean.
Never spray the product with water.
Never immerse the product in water.
Store the product in a secure, dry place, out of the reach of
children.
Do not place other objects on the product.
Keep all nuts, bolts and screws tight to ensure safe working
with the product.
Inspect the product and replace worn or damaged parts for
safety.
F 016 L94 055 | (20.02.2020)
Manual Line Feeding
Press the line-feed button (15), and pull the cutting line out
to the desired length.
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Inspect cable, replace if damaged
Contact Bosch customer service agent
Cut in stages
Feed cutting line using manual feed button (see
figure I)
Replace line spool
Check line spool and rewind cutting line if re-
quired (see figure I)
Replace line spool
Rewind spool
Inspect the spool, rewind if necessary
Only trim with the tip of the line, avoid touching
stones, walls and other hard objects. Feed the
line regularly to maintain full cutting diameter.
Ensure replacement parts fitted are Bosch-approved.
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools