FOXY R-12B Bedienungsanleitung Seite 8

- Wrong battery polarity will damage the ESC and void the warranty.
- Install the ESC in a suitable location with adequate ventilation for cooling. This ESC has a built-in over tempera-
ture cutoff protection feature that will immediately cut power to the motor once the ESC temperature exceeds
the 230° F/ 110° C temperature limit.
- Use only batteries that are supported by the ESC and ensure the correct polarity before connecting.
- Switch your transmitter ON first and ensure the throttle stick is in the minimum position before connecting the
battery pack.
- Never switch your transmitter OFF while the battery is connected to your ESC.
- Only connect your battery pack just before flying and do not leave your battery pack connected after flying.
- Handle your model with extreme care once the battery pack is connected and keep away from the propeller at
all times. Never stand in-line or directly in front of any rotating parts.
- Do not immerse the ESC under water, do not allow it to get wet while powered up.
- Always fly at a designated flying site and follow the rules and guidelines set by your modeller's club.
Recyclation and Waste Disposal Note (European Union)
Electrical/electronic equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic
waste; it should be disposed of via the appropriate specialised disposal system.
In the countries of the EU (European Union) electrical/electronic devices must not be discarded via the normal
domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2002/96/EG). You
can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be
disposed of in the proper manner at no charge to you.
By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding
of the environment!
Declaration of Conformity CE (European Union)
Hereby, Pelikan Daniel declares that these FOXY Line brushless electronic speed controllers are in compli-
ance with the essential requirements as laid down in the directive concerning electro-magnetic compatibility
(directive 89/336/EEC).
The full text of the Declaration of Conformity is available at www.PelikanDaniel.com.
Guarantee
The Pelikan Daniel products are covered by a guarantee which fulfils the currently valid legal requirements in your
country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the
equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use,
incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised
personnel, use of other than genuine Pelikan Daniel accessories, modifications or repairs which were not carried out by
Pelikan Daniel or an authorised Pelikan Daniel, accidental or deliberate damage, defects caused by normal wear and
tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers.
Please be sure to read the appropriate information sheets in the product documentation!
Address of the Local Distributor
PELIKAN DANIEL
Doubravice 110 | 533 53 Pardubice | T.: +420 466 260 133 | F.: +420 466 260 132
e-mail: info@pelikandaniel.com
Manufactured in China for Pelikan Daniel
RoHS