Concord Eye-Q Go! Anleitung Seite 10

1
1. Turn your camera on (
and make sure the review
switch is in CAPTURE mode.
( )
2
The review switch should be in
the position furthest away from
the shutter button.
IMPORTANT: Hold the camera steady until you hear the camera
beep and the LED stops blinking, which indicates that the picture
has been taken.
TAKING PICTURES
2
) 2. While looking into the
1
viewfinder, press the SHUTTER
BUTTON until the LED in the
viewfinder stops blinking and
you hear the camera beep.
The PICTURE COUNTER will
subtract one from the total
number of pictures available.
8