Using The Thermometer; Installing / Changing The Battery - AND UT-201BLE-A Bedienungsanleitung

Using the Thermometer

Installing / Changing the Battery

1. Remove the battery cover.
2. Remove the used battery with a
stick.
3. Insert new one into the battery
compartment as shown, taking
care that the polarities (+) and (-)
are correct.
4. Replace the battery cover.
Use only CR2032 battery.
Caution
Insert the battery as shown in the battery compartment. If installed
incorrectly, the device will not work.
When (Low battery mark) blinks in the display, replace battery with
new one. Replace the battery after the device turns off and wait for two
seconds or more.
(Low battery mark) does not appear when the battery is drained.
Use the specified battery only. The battery provided with the device is for
testing thermometer performance and may have a limited life.
Remove the battery if the device is not to be used for a long time.
The battery may leak and cause a malfunction.
Keep the thermometer out of the reach of children. A child may swallow
the battery while playing with it. If a child should swallow the battery,
seek medical treatment immediately.
English 7
Step 1
Step 2
Step 4
Step 3