Symbols - AND UT-201BLE-A Bedienungsanleitung

Symbols

Symbols that are displayed on the device
Symbols Function / Meaning
Standby and turn on the thermometer.
Last reading is stored in memory when the mark is displayed.
Full battery mark.
Low battery mark : A half of the battery capacity was consumed.
Battery is low when it blinks. Replace a battery with new one.
Temperature is above 42 °C during measurement.
Temperature is below 32 °C during measurement.
Thermometer or room temperature is above 40 °C.
Thermometer or room temperature is below 10 °C
Measurement is not correct. Check the way of use.
Malfunction of thermometer. Contact your dealer.
Time out of bluethooth communication.
Bluethooth communication error.
Bluethooth communication mark.
Pair mark to construct bluethooth communication pair.
Prediction measurement mark.
Equilibrium measurement mark.
Temperature units of Celsius and Fahrenheit.
Count down indicator for measurements means a waiting time until
displaying temperature. This indicator may includes few timing error
in process.
Direct current.
Type BF : Device is designed to provide special protection against
electrical shocks.
EC directive medical device label
EU-representative
Manufacturer
Date of manufacture
Not waterproof
Class II device
WEEE label
SN Serial number
BT Bluetooth address
Refer to instruction manual/booklet
Negative electrode
English 6