Maintenance; Cleaning; Storage; Cautions - AND UT-201BLE-A Bedienungsanleitung

Maintenance

Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem
using the troubleshooting instructions, request service from your dealer
or from the A&D service group. The A&D service group will provide
technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected
every two years, to ensure proper functioning and accuracy. Please
contact the authorized dealer in your area or A&D for maintenance.

Cleaning

Clean the device with a dry, soft cloth or a cloth dampened with water and a
neutral detergent and wrung tightly.
Wipe the temperature sensor of the device with a cloth to soak disinfectant
ethanol (76.9 to 81.4 v/v%).

Storage

Store the device with avoiding extremes in temperature, humidity, direct
sunlight, vibration, shock, dust or fire. Keep it put into the case with dry air
and room temperature.

Cautions

The device is not waterproof device. Do not splash water on it and avoid
exposure to moisture.
Do not use a organic solvent such as thinner or benzene.
The device can not be sterilized by autoclave, EOG or formaldehyde etc.

Regular Inspection

The thermometer is a precision device. Therefore, inspect in regularly.
Request an inspection to the dealer where you have purchased the device
when the device is in needs of an inspection.
Maintenance
English 17