Screen Menu; Setting "Zoom; Adjust The Display Area Of The Monitor According To The Input Signal (Display Area) (For Dvi-D/Hdmi Signal Only) - Sony SDM-H246W Bedienungsanleitung

4 Press the m/M buttons to select the desired mode
and press the OK button.
• OK: To reset the all items in the current Picture
Mode to the default.
• Cancel: To cancel resetting and return to the "Picture"
menu.

Screen menu

You can adjust the following items using the "Screen" menu.
• Zoom
• Display Area
• Auto Adjust
• Phase
• Pitch
• H Center
• V Center
• Resolution
x Setting "Zoom"
This feature lets you watch 4:3 normal broadcasts or other picture
sizes such as Letter box movies in several "Zoom" modes.
A "Zoom" value is set for each available input.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the m/M buttons to select "Zoom" and press
the OK button.
The "Zoom" menu appears on the screen.
Screen
Zoom :
Display Area :
Auto Adjust :
Phase :
Pitch :
H Center :
V Center :
Resolution
Select
Screen HD15
Zoom : Full
Display Area :
Auto Adjust : Off
Phase : 30
Pitch : 0
H Center : 50
V Center : 50
Resolution
1920 × 1200/60 Hz
Select Set Exit
OK MENU
(Screen) and
HDMI
Full
Normal
Real
Wide Zoom
Zoom
1920 × 1200/60 Hz
Set Exit
OK MENU
4 Press the m/M buttons to select the desired mode
and press the OK button.
• Full (default): The input signal is displayed on the screen
• Normal:
• Real:
• Wide Zoom: A picture is enlarged horizontally (non-
• Zoom:
Notes
• If the input from PC signal is selected, "Wide Zoom" and "Zoom" are
unavailable.
• If the input from Video signal is selected, "Real" is unavailable.
x Adjust the display area of the monitor
according to the input signal (Display Area)
(for DVI-D/HDMI signal only)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the m/M buttons to select "Display Area" and
press the OK button.
The "Display Area" menu appears on the screen.
4 Press the m/M buttons to select the desired mode
and press the OK button.
• PC:
• Video:
Note
During HDMI input, "Video" is set. (default)
If the input signal is automatically judged to be a PC signal, "Display
Area" is unavailable.
17
(GB)
in full, irrespective of the picture's mode or
resolution.
The input signal is displayed on the screen
at its actual aspect ratio.
Therefore, black bands may appear at the
right and left of the picture, depending on
the signal.
The input signal is displayed on the screen
at its actual resolution. Less than 1920 ×
1200 signals are displayed at the center of
the screen surrounded by a black frame.
linear) to fill the 16:10 screen, keeping the
original image as much as possible.
A picture is enlarged horizontally and
vertically to an equal aspect ratio that fills a
16:10 screen. Useful for viewing Letter
Box signal.
(Screen) and
Adjust the display area to suit the PC
signal.
Adjust the display area to suit the Video
signal.