Wi-Fi Setup - Philips AC2729 Benutzerhandbuch

Wi-Fi setup

Setting up the Wi-Fi connection
for the first time
1
Download and install the
"Air Matters" app from the App
Store or Google Play.
2
Put the plug of the air purifier in the
power socket and touch
on the air purifier.
» The Wi-Fi indicator
orange
for the first time.
3
Make sure that your smart device is
successfully connected to your Wi-
Fi network.
4
Launch the "Air Matters" app and
click on the "+" on the top right of
the screen. Follow the onscreen
instructions to connect the air
purifier to your network.
5
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the "Air Matters"
app for extensive and up-to-date
troubleshooting tips.
EN
8
•
This instruction is only valid when
the air purifier is being set up for
the first time. If the network has
changed or the setup needs to be
performed again, consult section
"Setting up the Wi-Fi connection
when the network has changed" on
page 8.
•
If you want to connect more than
one air purifier to your smart device,
you have to do this one by one.
Complete the set up of one air
purifier before you turn on the other
air purifier.
•
to turn
Make sure that the distance
between your smart device and the
blinks
air purifier is less than 10 m without
any obstructions.
•
This app supports the latest
versions of Android and iOS. Please
check www.philips.com/purifier-
compatibility for the latest update
of supported operating systems and
devices.
Setting up the Wi-Fi connection
when the network has changed
•
This applies when the default
network to which your purifier is
connected has changed.
1
Put the plug of the air purifier in the
power socket and touch
on the air purifier.
2
Touch
3 seconds until you hear a beep.
» The air purifier goes to pairing
» The Wi-Fi indicator
3
Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the first
time" section.
Note
Note
and simultaneously for
mode.
orange.
to turn
blinks