Camera Screen Display Control : Monitor 2 - Sony YS-DX316P Bedienungsanleitung

Camera Screen Display Control : Monitor 2

In the initial setting, Monitor 2 outputs the image of
INPUT SELECT (1) of the camera (Live Camera 1).
Viewing another camera image (Example:
Camera 5)
1
Press any INPUT SELECT button. Press the
SEQUENCE button and press the OPTION button.
The OPTION indicator flashes.
2
Press the INPUT SELECT (5) button and press the
OPTION button. Monitor 2 outputs the image from
Camera 5. The OPTION indicator is turned off.
Viewing sequential images
1
Press any INPUT SELECT button. Press the
SEQUENCE button and press the OPTION button.
The OPTION indicator flashes.
2
Press the SEQUENCE button again. Press the
OPTION button.
The sequential interval has been set in the
MONITOR OUT SET menu.
Note
If the camera input has not been synchronized, the
image may be disturbed when the image display is
switched.
24
(EN)
Viewing the same image as on Monitor 1
Monitor 2
In menu "4. MONITOR OUT SET", the item
MONITOR2 ← MONITOR1 to "Y" (Yes): what is
displayed on monitor 1 will also be displayed on
monitor 2.
Note
If the MONITOR2 OUT in the ALARM SET menu
has been turned on (see page 14(EN)), and if there is
an Alarm input, the Monitor 2 screen will switch to the
screen that has the alarm. If there is more than one
alarm, the alarm screens will be displayed alternatively
every second.
Monitor 1