Wiseup GL6000 Handbuch Seite 2

3.1. POWER ON/OFF (WITH EARPHONE INSERTED)
3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The red indicator light
will be illuminated for 3 seconds and then the blue one will come on and stay illuminated togeth-
er with the red one. The camera will start playing music automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again. The red and
blue indicator light will turn off simultaneously.
3.2. POWER ON/OFF (WITHOUT EARPHONE INSERTED)
3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The blue indicator
light will stay illuminated while the red one will be illuminated for 3 seconds and then turn off.
The camera will start video recording automatically.
3.2.2. Power off the camera by pressing the Power Button for 2 seconds again. The blue indica-
tor light will turn off.
[Note]:
1). If the camera is running low on batteries, the red indicator light will flash slowly for 30 seconds and
turn off. Then the camera will save video files then shut down automatically.
2). The camera will shut down automatically if it is in standby mode without any operation more than 3
minutes.
3.3. VIDEO RECORDING (WITH EARPHONE INSERTED)
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. The red indicator light
will be illuminated for 3 seconds and then the blue one will come on and stay illuminated togeth-
er with the red one. The camera will start playing music automatically.
3.3.2. Press the Mode Button once to start video recording. The blue indicator light will stay
illuminated while the red one will turn off within 5 seconds.
3.3.3. Press the Power Button once again to stop video recording. The blue indicator light will
keep flashing, indicating the camera is back to standby mode.
3.4. VIDEO RECORDING (WITHOUT EARPHONE INSERTED)
3.4.1. Power on the camera by pressing the Power Button for 2 seconds. The blue indicator
light will stay illuminated while the red one will be illuminated for 3 seconds and then turn off.
The camera will start video recording automatically.
3.4.2. Press the Power Button once again to stop video recording. The blue indicator light will
keep flashing, indicating the camera is back to standby mode.
[Note]:
1). A video clip will be generated and saved every 15 minutes automatically.