Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
• RECALLING HOT CUE MEMORIES FROM PERMANENT INTERNAL MEMORY:
If you have stored permanent cue points and loops for a CD, you can choose to
recall these while reloading that CD at a later time.
• RECALL: Before loading the CD, just press the MEMORY button until it starts
flashing and the display shows "RECALL". Now press the OPEN/CLOSE button
to load the CD. It takes some seconds to load the HOT CUE buttons, during this
time the display shows "RECALL". If no permanent cue points where found, the
MCD200 stops the recall process automatically.
• DON'T RECALL: Just insert the CD as usual and start playback. The MCD200
will ignore the permanent cue point information for this CD.
• DELETE THE CURRENT "HOT CUE" BUTTONS:
This can be done in two ways:
• Simply program a new HOT CUE, the previous will be erased.
NOTE: Don't forget to update the new Cue point information to permanent memory!
• Put another CD in the disc tray, the HOT CUES will be erased.
NOTE: Only the HOT CUE buttons are erased, the cue point information in permanent memory
is preserved.
• DELETE THE ENTIRE INTERNAL CUE MEMORY:
Turn the SEARCH Button(1) to the left (counterclockwise) and keep it in that
position while switching the MCD200 on: the permanent cue memory is cleared.
During this action the display shows "clearALL".
CAUTION: THIS ACTION IS IRRIVERSIBLE, ALL CUE POINTS/LOOPS WILL BE DELETED!!!
• PITCH BENDING:
This function is used to put the beats of two tracks in perfect sync. This can be
done in two ways:
• PITCH BEND buttons: The speed increases or decreases respectively as long
as the PITCH BEND+ or PITCH BEND- button is pressed.
• JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch
of the music by turning the JOG WHEEL clockwise to speed up or
counterclockwise to slowdown. The rotation speed the JOG WHEEL determines
the percent of pitch bend.
• PLAYING MP3 FILES:
The CD player automatically detects if a CD contains MP3 files. The MCD200 is
able to read several different MP3 formats. The display shows some of the ID3-
tags (song title / performer / folder name / bitrate). The CD may contain up to 999
MP3- files, spread over maximum 255 folders.
The MP3-files may have the following file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3
Check the technical specifications to see which MP3-files are allowed.
• PLAYING CD-R and CD-RW:
Apart from normal audio CD's the MCD200 can play both CD-R (CD recordable)
and CD-RW (CD rewriteable). Please note that you should always use the "disc at
once" and "track at once" disc writing options! Burning your CD's at speeds higher
than 12x can cause reading errors. If the disc is multi session, it will only play the
first session:
o if the first session is CD-DA you can only play CD-DA tracks.
o if the first session is MP3 you can only play MP3 files.
JB SYSTEMS®
11/53
USER MANUAL
MCD200
ENGLISH
SPECIFICATIONS
Power Supply:
AC 230 V, 50Hz
Power Consumption:
14,5W
Output level:
2,0Vrms +/0.5dB @ 1kHz, 0dB
Frequency response:
20-20.000Hz (+/-0,4dB)
THD + noise (20kHz LPF):
0,005% @ 1kHz, 0dB
S/N Ratio (IHF-A):
>120dB @ 1kHz, 0dB
Short access time (next track):
<2sec
Long access time (track 1
20):
<4sec
Laser Pickup:
Sony KSM-213VCS 3spot detection 780nm
Electronic tracking:
Full automatic digital tracking.
DISC FORMAT:
Possible file extensions:
.mp3 ~ .MP3 ~ .mP3 ~ .Mp3
ID3 tag compatibility:
ID3v2 and earlier
ISO9660:
Level1 (max. 8"/8.3" character style)
Level2 (max. 31/30 character style)
Joliet:
max. 64/64 character style
CD-ROM sector format:
mode-1 only
Max. Folders:
255
Max. Files:
999
MP3 FORMATS:
MPEG1 Layer3
:
mono / stereo sampled at: 32 - 44,1 - 48kHz
(ISO/IEC11172-3)
Bitrates:
32 – 320 Kbps
Bitrate modes:
CBR
MPEG2 Layer3
:
mono / stereo sampled at: 16 – 22,05 - 24kHz
(ISO/IEC13818-3)
Bitrates:
8 – 160 Kbps
Bitrate modes:
CBR
MPEG2,5 Layer3:
mono / stereo sampled at: 8 – 11,025 - 12kHz
Bitrates:
8 – 160 Kbps
Bitrate modes:
CBR
Dimensions:
348(W) x 106(H) x 246(D) mm
Weight:
3,06 kg
JB SYSTEMS®
12/53
USER MANUAL
or VBR
(Constant Bitrate)
(Variable Bitrate)
or VBR
(Constant Bitrate)
(Variable Bitrate)
or VBR
(Constant Bitrate)
(Variable Bitrate)
MCD200
Werbung
Inhaltsverzeichnis
