Custom Procedure; Setup - Sun BLIZZARD QTECH III Gebrauchsanleitung

CUSTOM PROCEDURE

CUSTOM PROCEDURE
much faster (about 30 minutes of total running time).
From the MAIN MENU:
Select the CUSTOM PROCEDURE, the following screen is displayed (only if the hardware for
hybrid vehicles is installed in the machine):
Select the STANDARD VEHICLE or HYBRID VEHICLE; the following screen will be displayed:
NOTE: When HYBRID VEHICLE is selected UV is disabled.
NOTE: VACUUM TIME and LEACK CHECK have fixed value (not modifiable)
Use arrows to scroll through menu items, then use the keypad to modify procedure
parameters; press OK to begin the CUSTOM PROCEDURE.
From this point onwards refer to automatic procedure paragraph.
INSTRUCTIONS MANUAL
is a programmable procedure similar to the automatic procedure but
AUTOMATIC MANUAL

SETUP

MAINTENANCE
R134a
Standard Vehicle
The use of PAG OIL or DYE
in hybrid cars is dangerous
for the safety of the operator.
Please use the
recommended oil with
specific device
Hybrid Vehicle
R134a
VACUUM TIME
LEAK CHECK
OIL
UV
GAS FILLING
HP
-64-
CUSTOM
DATA
CUSTOM PROCEDURE
CUSTOM PROCEDURE
8 min
1 min
LP
HP+LP