Refrigerant And Lubricant - Personal Protective Equipment And Precautions; Hoses Connection - Sun BLIZZARD QTECH III Gebrauchsanleitung

The bottle must be filled to 80% of its maximum capacity to leave a plenum chamber for
the gas to absorb any increases in pressure.
- Never touch the taps on the inner bottle.
- Throw the oil taken out of the A/C system and the vacuum pump into the relevant containers
for spent oils.
- Change the filters at the intervals laid down, using only filters recommended by the
manufacturer.
- Only use the oils recommended by the manufacturer.
- Only use the UV approved by the manufacturer.
- Never confuse the vacuum pump oil with the oil for the air-conditioning systems.
Failure to comply with any of these safety rules leads to any form of guarantee for the machine
being rendered null and void.
Machine is provided with class III safety valve, in case of malfunctioning it can create an
external sack of flammable gas; keep the machine in well ventilated area.
WARNING: R134a and/or R1234yf vapor/gas refrigerant are heavier than air and may thicken
on the floor or inside the cavity/pits and cause choking by reducing oxygen available for
breathing.
At high temperatures the refrigerant decomposes releasing toxic and caustic substances,
hazardous for the operator and the environment. Avoid inhalation of the refrigerants and A/C
system oils .
Exposure can irritate the eyes and airways.
WARNING! The machine must be connected to a socket with effective ground
WARNING: This is a class "A" product. In a domestic environment this product may
cause radio interference. In such cases, the user may be required to take adequate
measures.
REFRIGERANT AND LUBRICANT - PERSONAL
PROTECTIVE EQUIPMENT AND PRECAUTIONS
Handled with caution refrigerants and pressure vessels, since otherwise there could be health
risks .
The operator must wear safety glasses, gloves and suitable clothing to work , contact with
refrigerant may cause blindness (eyes), and other physical damage (frostbite) to the operator.
Avoid contact with the skin, the low boiling temperature (about -26°C for R134a and about -
30°C for R1234yf ) can cause cold burns.
Do not change the setting of the relevant devices for safety, do not remove the seals of the
safety valves and control systems . Do not use external tanks or other storage containers that
are not approved, or without safety valves.
During the functioning, the air vents and
ventilation equipment must not be blocked or
covered

HOSES CONNECTION

Hoses may contain refrigerant under pressure. Before substitute the quick coupler verify the
corresponding pressure in the service hoses (gauge).
The machine is equipped with the following safety devices:
SAFETY PRESSURE: stops the compressor in case of excessive
pressure
SAFETY VALVE: opens when the pressure inside the system reaches a
INSTRUCTIONS MANUAL
-11-