Herunterladen Inhalt Inhalt Diese Seite drucken

Shutting Down The System; Suspending System Operation - Fujitsu Stylistic LT C-500 Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für Stylistic LT C-500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Shutting Down the System

Follow these steps to shut down and turn off your system:
Note:
Always use the following procedure unless your system has frozen up and will not
allow normal shutdown. If you need to shut down after your system freezes up,
click the recessed Shut Off button located to the right of the DC Input jack. Do not
use the Shut Off button as your normal means of powering down the
system; when the Shut Off button is used, all active data is lost.
1. If system operation has been suspended, resume system operation. (See Table 1-1
and "Resuming System Operation" later in this chapter for details.)
2. Save your work and close all running programs.
3. Choose Shut Down from the Windows Start menu and carry out the Shut Down
command. The system is now in the Off state.

Suspending System Operation

The Stylistic LT C-500 pen tablet allows you to suspend the system operation without
closing programs or exiting the operating system. Use this feature to conserve battery
power when a system shutdown is not practical or when the battery needs to be
changed.
To suspend system operation:
1. Press the Suspend/Resume button, or carry out the Standby command from your
operating system or power management program. (If your system is configured
to suspend operation using Save-to-Disk mode, which is explained later in this
procedure, a message is displayed while data is saved to your hard disk.)
If you are replacing the battery pack, wait until system is off or system
operation is suspended and the power icon is flashing before you remove
the battery pack. Failure to do so could result in loss of your unsaved data.
The Power icon either flashes (Suspend-to-RAM) or is not displayed
(Save-to-Disk) when system operation is suspended, depending on how your
system is configured. At this point, programs that were running are stopped,
active data is saved, and the system enters one of two different low-power states,
or suspend modes, as explained in the following paragraphs.
16
Using the Stylistic LT C-500 Pen Tablet
Cautions
2
2

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis