Installing and removing a processor
Installing and removing a processor
Fully disconnect the system from the mains voltage before performing any
of the tasks described below. Further details on how to do this can be
found in the operating manual for your system.
Technical data
•
Socket LGA1156, max. 95 W
•
A list of the processors currently supported by this mainboard is available on
the Internet at: "http://ts.fujitsu.com/mainboards".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the operation of the processor and may destroy the
processor. Insert the processor into the slot with extreme care, as the spring
contacts in the slot are very delicate and must not be bent.
Never insert a processor in to a slot if one or more spring contacts are bent, because
this could damage the processor. Please contact your dealer directly in this case.
Fujitsu Technology Solutions
English - 5
21