System Settings Menu - Modster DUO SMART CHARGER 600 Betriebsanleitung

F
User Manual

SYSTEM SETTINGS MENU

Long press the CH1 roller wheel to activate the system default menu.
Max Input Power: When the input power can not reach the charger's maxi-
mum working power requirement(700W), to ensure stable and safe operation
of the MODSTER Duo Smart Charger 600, this value should be adjusted
according to the input power source used for the charger. For example, when
using a 20V/20A DC power supply, this value should be set to 400W
(P=U X I).
Min Input Power: When the user takes a battery as a input power source, this
setting can protect the battery not overdischarged. When the charger detect
the input voltage lower than the setting value, then the charger will stop the
current task and remind the user with showing" DC IN TOO LOW". For examp-
le, when using a 6S LiPo as a power source, we can set this value at 21.0V to
protect the battery not overdischarged.
24
MODSTER Duo Smart Charger 600
www.modster.at