Perel Tools EAVM360 Bedienungsanleitung Seite 3

DC
Current
Resistance
Decibel
Iceo
hFE
Diode
7. Operating Instructions
a. Ω Ω Ω Ω test
1. Plug the test leads into COM and + sockets.
2. Place the range selector to a prescribed range position.
3. Short the test leads and turn 0Ω ADJ to set the pointer to zero position.
4. Make sure that there is no voltage across the circuit to be tested.
5. Connect the test leads to the tested resistor and read the scale in accordance with the reference table.
b. DCV test
1. Plug the red test lead into the + socket and the black one into the - COM.
2. Set the range selector to a selected DCV range position.
3. Connect the red test lead to the positive polarity of the circuit tested and the black one to the negative.
4. Read the DCV.A scale referring the reference table.
c. ACV test
1. Plug the red test lead into the + socket and the black into the - COM socket.
2. Set the range selector to a chosen ACV range position.
3. Connect the test leads to the circuit being tested regardless of the polarities.
4. Read ACV scale with the reference table.
EAVM360
DC 50 µ A
2.5 mA
25 mA
0.25 A
10 A
x 1
x 10
x 100
x 1 K
x 10 K
AC 10 V
50 V
250 V
x 1
x 10
x 10
x 1K
x 100
x 10
x 1
B 50
B 250
B 250
B 250
B 10
A
A
A
A
A
G
G
G
E
E
D
E
F
E
F
E
F
E
F
3
x 1
x 0.01
x 0.1
x 0.001
x 1
x 1
x 10
x 100
x 1000
x 10000
x 1
x 1 + 14 dB
x 1 + 28 dB
x 1
(for big TR)
x1
(for small TR)
x1
µ A x 10
x 1
µ A x 100
x 1
mA x 1
x 1
mA x 10
x 1
PEREL