Perel Tools EAVM360 Bedienungsanleitung

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EAVM360! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
Your EAVM360 is a professional analogue multimeter. It is ideally suited for field, lab, shop, and home applications.
It is capable of performing functions:
DC Voltage
Resistance
Diode test
2. Warning
Use extreme caution in the use of this device. Improper use of this device can result in injury or death. Follow all
safeguards suggested in this owner's manual in addition to normal safety precautions in dealing with electrical
circuits. Do not use this device if you are unfamiliar with electrical circuits and testing procedures.
3. A Word about Safety
This multimeter is designed to ensure the safest operation possible. However, safe operation depends on you, the
operator. Make sure you follow these simple safety rules:
• Never apply a voltage to the multimeter that exceeds the limits given in the specifications. Never apply more than
1000V DC or 1000V rms AC between an input jack and ground.
• Use extreme caution when working with voltages above 60VDC or 30 VAC rms.
• Always discharge filter capacitors in the power supply circuit under test before you attach test leads.
• Never connect to a source of voltage when you select the resistance measurement.
• Always turn off power and disconnect the test leads before you replace the batteries or fuse.
• Never operate the multimeter unless the battery cover is in place and fully closed. When carrying out
measurements on television or switching power circuits, always remember that there may be high amplitude
voltages pulses at test points which can damage the meter.
4. Maintenance
Your EAVM360 is an example of superior design and craftsmanship. The following suggestions will help you care for
the multimeter so you can enjoy it for years:
• Keep the multimeter dry. If it gets wet, wipe it dry immediately.
• Use and store the multimeter only in normal temperature environments.
EAVM360
EAVM360 – ANALOGUE MULTIMETER
Transistor Iceo test
AC Voltage
1
DC Current
Transistor hFE test
PEREL