Perel Tools EAVM360 Bedienungsanleitung Seite 2

Temperature extremes can shorten the life of electronic devices or damage batteries.
• Handle the multimeter gently and carefully. Dropping it can damage the circuit boards and case and can cause
the multimeter to work improperly.
• Use only fresh batteries of the required size and type. Always remove old or weak batteries.
If you do not plan to use the multimeter for a month or more, remove the batteries. This protects the multimeter
from possible leakage.
• Disconnect the test probes before opening the multimeter.
• Replace blown fuse only with same size and type: F 1.5A / 250V.
• If any faults or abnormalities are observed, do not use this device and let it check by authorised personnel.
• Never use the meter unless the back cover is in place and fastened fully.
• To clean the meter, use a damp cloth and mild detergent only, do not use abrasives or solvents.
5. Description of the Meter
Indicator zero corrector
Range selector switch knob
Measuring terminal +
Measuring terminal - COM (common)
DC 10A terminal
0 Ω adjusting knob
Panel
Indicator Pointer
Rear case bolt
Rear case
6. Reference Table for Reading
Test
DC Volt
AC
Volt
EAVM360
Range Position
DC 0.1V
0.5V
2.5V
10V
50V
250V
1000V
AC 10V
50V
250V
1000V
Scale to read
B 10
B 50
B 250
B 10
B 50
B 250
B 10
C 10
B 50
B 250
B 10
2
Multiplier
x 0.01
x 0.01
x 0.01
x 1
x 1
x 1
x 100
x 1
x 1
x 1
x 100
PEREL