Video Mode - Samsung Digimax 130 Bedienungsanleitung

SETTING UP THE FUNCTION
Setting up the function by using the LCD monitor

VIDEO MODE

You can set up the Video output signal from the camera in NTSC or PAL, depending on the
type of device (monitor or TV, etc.) to which it is being connected.
Select the correct video output for the device that is to be connected.
The LCD monitor of camera will automatically switch off when the camera is connected to an
external monitor.
The information on the external screen will be exactly the same as on the LCD monitor.
Refer to page 37~40.
1
Turn the power on.
2
Set the camera to SETUP mode and the SETUP menu will
be displayed on the LCD monitor.
3
Use the Menu select button ( / ) to select VIDEO MODE.
4
Press the Enter button and the cursor will skip to the
VIDEO MODE data field.
5
Use the Menu select button to select data (NTSC, PAL).
The default setting is NTSC.
6
Press the Enter button again to make the change and the cursor will automatically return to the
SETUP menu.
Note
Video mode is only available in PLAY mode.
SETUP MENU
DATE / TIME
LANGUAGE
SOUND
FORMAT MEDIA
VIDEO MODE
RESET TO DEFAULT
NTSC PAL
45