Setting Up The Function; Setting Up The Function By Using A Lcd Monitor; Record Mode - Samsung Digimax 130 Bedienungsanleitung

SETTING UP THE FUNCTION

Setting up the function by using the LCD monitor

RECORD Mode

Press the Menu button in RECORD mode, the Record menu will be displayed.
LCD BRIGHTNESS
Changes the brightness setting of the LCD monitor.
1
Turn the power on.
2
Set the camera to RECORD mode (
3
By pressing the Menu button, the RECORD menu will
be displayed on the LCD monitor.
4
Use the Menu select button (
BRIGHTNESS setting.
5
Press the Enter button and the cursor will skip to the data field.
6
Use the Menu select button ( / ) to increase/decrease the LCD BRIGHTNESS.
Brightness setting : -5 ~ +5, Interval = 1
Default setting is 0.
7
Press the Enter button again to make the change.
The cursor returns to the RECORD menu automatically when the change has been made.
8
Press the Menu button again to make the RECORD menu disappear.
The setting is saved even if the camera power is off .
In PLAY mode, the same setting is applied.
).
/ ) to select LCD
RECORD MENU
LCD BRIGHTNESS
QUICKVIEW
WHITE BALANCE
EV COMPENSATION
0
33