Manual Operation; Oven Lighting - AEG COMPETENCE KB68004-5-M Anwenderhandbuch

Manual operation

After setting the clock, the oven is ready for
use:
1 Press the On button
2 Press
function.
3 The temperature display will show the preset
temperature for that cooking function.
Press on the temperature button
change it. Select the desired temperature by
pressing on the
4 The top oven cavity will start to heat up.
Functions
minutes. The oven will beep when it reaches the selected temperature.
Caution!: this preheating function turns on the turbo motor at the back of the top oven cavity.
5 During oven heating, the temperature degree
symbol on the temperature display will fl ash
to show that the food is being heated.
6 Press on the Off button
Caution! When cooking has fi nished, you will
notice that oven cooling feature will work until
the temperature inside the oven has been suitably
lowered.

Oven Lighting

The inside light will go on:
– When the oven door is open. If the door is
not closed after a certain time, the light will
turn off to reduce power consumption.
– When any cooking function is selected.
The light will turn off after a certain time.
If you want to turn the light on during cooking,
just touch the Oven Light button
to turn off the light press the the Oven Light button
.
to select the desired cooking
buttons.
will start the fast preheating function for a few
to stop cooking.
. If you want
to
.
Using the oven 9