Child Lock Function - Sharp SJ-BA31IEXI2-EU Bedienungsanleitung

CHAPTER -3: USING YOUR FRIDGE FREEZER
Light cancelling mode
When would it be used?
• If you wish to cancel lights of cooler, you can select this mode.
• While pushing the freezer and mode buttons, open and close cooler door 3 times. The mode
will be selected in this way. From now on, the lights will not come on until the function is not
cancelled in the same way.
• If you want to cancel this mode, repeat the same process or the mode will automatically cancel
itself after 24 hours.

Child lock function

When would it be used?
To prevent children from playing with the buttons and changing the settings you have made, child
lock is available in this appliance.
Activating Child Lock
Press the Freezer and Cooler buttons simultaneously for 5 seconds.
Deactivating Child Lock
Press the Freezer and Cooler buttons simultaneously for 5 seconds.
Note: Child lock will also be deactivated if the electricity is interrupted or the fridge is unplugged.
Screen saver mode
Instructions for use
• This mode will be activated when you press the mode button for 5 seconds.
• If no button is pressed within 5 seconds when the mode is active, the lights of the control panel
will go off.
• If you press any button when the control panel lights are off, the current settings will appear on
the screen, and then you can make the adjustment as needed. If you do not cancel the screen
saver mode or do not press any button within 5 seconds, the control panel will go off again.
• To cancel screen saver mode press the on mode button for 5 seconds again.
• When screen saver mode is active you can also activate the child lock.
• If no button is pressed within 5 seconds after child lock is activated, the lights of the control panel
will switch off. You can see latest settings or modes status after you press any button. You can
cancel child lock as described in the instruction of this mode while the control panel light is on .
EN -8-