Restore Factory Settings - Homematic Hmip Swsd Bedienungsanleitung

8

Restore factory settings

The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the smoke alarm, please
proceed as follows:
• Turn the smoke alarm in an anticlockwise direc-
tion and press the release lever to pull it from the
ceiling bracket (see figure 6).
• Press the operating button (D) and turn the
smoke alarm into the ceiling bracket at the same
time. Press and hold down the button until the
status LED starts flashing orange.
• Now release the operating button (D).
• Press and hold down the operating button (D)
again for 4s, until the device LED (C) lights up
green.
• Release the operating button (D) to finish the re-
set procedure.
The device will perform a restart and activates the teach-
in procedure.
Restore factory settings
59