HomeMatic HmIP SWSD Bedienungsanleitung Seite 45

To integrate the smoke alarm into your system
and enable it to communicate with other
Homematic IP devices, you must teach-in the
device to your Homematic IP Access Point first.
• Open the Homematic IP app on your smart-
phone.
• Select the menu item "Teach-in device".
• Turn the smoke alarm in a clockwise direction
into the ceiling bracket until it clicks into place
(see figure 4a and 4b).
• Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for
another 3 minutes by pressing the operating
button (D) briefly.
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
Start-up
45