Assembling The Bed - Quax BED 150*70 Handbuch

BED 150*70

4. Assembling the bed

Step 1 : Use the parts A, B, C, the 12 bolts E, the 12 cylindrical dowels F and the hexagonal key G
Insert one by one the cylindrical dowels (F) in the provided openings at the end of the sides (B). Pay atten-
tion that the opening in the dowel faces the bolt. Insert the bolts (E) in the provided openings in the middle
on the sides of the legpanels (A). Insert the sides (B and C), pull the bolts one by one backwards and push
them back into the openings of the sides and tighten them slightly with the hexagonal key (G). Only tighten
fi rmly when all bolts are installed.
Step 2 : Use the parts of step 1 and both bottoms D
Position the bottoms (D) on their provided supports on both sides (B and C).
01 01 50xx
Juniorbed
Juniorbett
Lit junior
Junior bed
Quax Quax
First dreams First dreams
® ®
First steps First steps
17