Assembling The Bed - Quax MEZZANINE QUARRE Handbuch

MEZZANINE QUARRE

4. Assembling the bed

Hoogslaper met bureel
54 01 26xx
Hochbett mit Schreibtisch
Step 1 - Preparation of both upper
bed sides : use both sides (A), eight
wooden dowels (2) and twelve cylindri-
cal nuts (1)
Push per side two wooden dowels (2)
in the provided openings on each end.
Insert per side three cylindrical nuts (1)
in the provided openings left and right
on the innerside of the sides.
Step 2 - Preparation of the lower side : use
the side (B), four wooden dowels (2) and four
cylindrical nuts (1)
Push per side two wooden dowels (2) in the
provided inner openings on the left and right
side. Insert the cylindrical nuts (1) in the pro-
vided openings left and right on the innerside.
Step 3 - Compiling the bed : use the
parts of steps 1 en 2, both sides of
the bed (C), 16 woodscrews (3),
hexagonal key (6) and 16 caps (5)
Push all parts with their dowels in the
provided openings. Push the wood
screws (3) through all provided open-
ings in the bed sides (C) and tighten
all these connections with the hexago-
nal key (6). Push a cap (5) in every
opening with a visible wood screw.
Mezzanine avec bureau
High bed with desk
Quax Quax
the
First dreams First dreams
® ®
First steps First steps
23