Care And Cleaning - Kenwood SJM550 Serie Bedienungsanleitungen

key
spout
finger pad
flip top lid
clear view window
lid release
water level window
on/off switch with indicator light
360° powerbase
cord wrap
filter
to use your kettle
1 Fill the kettle through either the
spout or lid. To open the lid press
the lid release
must be between 'MAX' and 'MIN'
(0.75 L).
G
Be economical: do not boil more
water than you need.
G
To improve the quality of your
drinks always use fresh water.
G
Empty the kettle after each use.
2 Close the lid by pushing down on
the finger pad area
3 Plug in and switch on. The
indicator light will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the
boiling ensure that the
switch is in the off position
before removing from the
powerbase.
G
If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
"descaling".
G
Your kettle is fitted with a filter to
hold back limescale particles.
G
If you find drops of water under
your kettle, don't worry - it is just
condensation.
. The water level
.
boil-dry protection
G
If you switch on with too little water,
your kettle will cut out
automatically. Switch off, remove
from the powerbase and let it cool
down before re-filling. When it has
cooled down, the switch will reset
itself.

care and cleaning

G
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
G
Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the metal and plastic
surfaces.
the inside
G
Even though your kettle comes
with a filter, you still need to clean
the inside (and the filter) regularly.
the filter
1 Open the lid.
2 Slide the filter out
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Slide the filter back in to refit
descaling
G
Regular descaling of the flat
element will improve the
performance of your kettle. If the
kettle is not descaled regularly the
build up of limescale may result in
the following:
G
problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
G
the kettle may take longer to
boil.
G
the flat element may be
damaged.
4
.
.